70-412 Free Exam Dumps,70-412 Updated Questions‎

Pass4itsure 70-412 Dumps will be your definite lead source should you want to become successful in your 70-412 test. This approach is very important in improving the level of your 70-412 test preparation.
If you want to get more than 90% of the scores in the Microsoft 70-412 exam certification, then these dumps should be your top priority.This maybe you’re interested: https://www.pass4itsure.com/70-412.html.

[2019. Latest Microsoft 70-412  Dumps From Google Drive]: https://drive.google.com/open?id=1u-SoEHp5536onsZeOXTEY1_meYEJLOrW

The necessity of passing the exam

The cause behind this Microsoft 70-412 certification exam value is the skillset that one particular will acquire after earning the Configuring Advanced Windows Server 2012 Services simulation questions.Together with the support on the Microsoft 70-412 exam simulator you’ll be able to very easily safe the high paying job in the IT sector.

Certification

Microsoft Configuring Advanced Windows Server 2012 Services
Awarded by Microsoft

Description

Course Curriculum	Learning Outcomes
Configure and Manage High Availability	Managing Network Load Balancing clusters
Configure File and Storage Solutions	Network File System
Implement Business Continuity and Disaster Recovery	Windows Server backup overview
Configure Network Services	Dynamic Host Configuration Protocol (DHCP) overview
Configure the Active Directory Infrastructure	Deploy Active Directory Domain Services (AD DS) in your enterprise
Configure Access and Information Protection Solutions	Deploy a private CA with Windows Server 2012

Who this course is for:

Users studying for their MSCE, MCSE

Bestseller |70-412 exam

Cisco ICND2 200-105 – CCNA Bootcamp	Current price$99.99
CompTIA Network+ Cert. (N10-007): The Total Course	Current price$199.99
CompTIA Security+ Certification (SY0-501): The Total Course	Current price$194.99
Cisco ICND1 100-105 – CCENT Certification Bootcamp	Current price$99.99
Cisco CCNA 200-125 – The Complete Guide to Getting Certified	Current price$199.99
CCIE Routing & Switching Version 5.0 – IP Multicasting	Current price$99.99
Microsoft 70-741 – Networking with Windows Server 2016	Current price$199.99
Cisco CCNA Packet Tracer Ultimate labs: CCNA Exam prep labs	Current price$19.99
CISSP Certification: CISSP Domain 5 & 6 Video Boot Camp 2019	Current price$199.99
CISSP Certification: CISSP Domain 7 & 8 Video Boot Camp 2019	Current price$199.99

Get best dumps of Microsoft 70-412 exam easily

QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named
Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.
You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1 and
Server2.
You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.
To which group on Server2 should you add Tech1? To answer, select the appropriate group in the answer area.
A. IPAM MSM Administrators
B. Remote Management Users
C. WinRMPemoteWMNIUsers_
D. IPAM Administrators
Correct Answer: C
If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be a member of
the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of the appropriate IPAMsecurity
group (or local Administrators group).

 

QUESTION 2
Your network contains one Active Directory forest named contoso.com. The forest contains two child domains and six
domain controllers. The domain controllers are configured as shown in the following table.

You need to enable universal group membership caching for the Europe office and Asia office sites.
What should you use?
A. Set-ADSite
B. Set-ADReplicationSite
C. Set-ADDomain
D. Set-ADReplicationSiteLink
E. Set-ADGroup
F. Set-ADForest
G. Netdom
Correct Answer: B
The Set-ADReplicationSite cmdlet is used to set the properties for an Active Directory site that is being used for
replication.
Parameter: -UniversalGroupCachingEnabled
Indicates whether the cmdlet enables universal group caching. If this parameter is true, it indicates this site caches
universal groups, which are those groups cached on global catalog (GC) servers. It can be useful in sites with no GC
servers
available locally.
Reference: Technet, Set-ADReplicationSite

 

QUESTION 3
Your network contains an Active Directory domain named contoso.com.
All servers run Windows Server 2012 R2. The domain contains a server named Server1.
You open Review Options in the Active Directory Domain Services Configuration Wizard, and then you click View
script.
You need to ensure that you can use the script to promote Server1 to a domain controller.
Which file extension should you use to save the script?
A. .xml
B. .ps1
C. .bat
D. .cmd
Correct Answer: B
The View Script button is used to view the corresponding PowerShell script The PowerShell script extension is .ps1,
The Answer could logically be either a .cmd file or a .bat file.
According to http://www.fileinfo.com/:
PAL – Settings file created by Corel Painter or Palette of colors used by Dr. Halo bitmap images BAT – DOS batch file
used to execute commands with the Windows Command Prompt (cmd.exe); contains a series of line commands that
typically might be entered at the DOS command prompt; most commonly used to start programs and run maintenance utilities within Windows. XML – XML (Extensible Markup Language) data file that uses tags to define objects and object
attributes; formatted much like an .HTML document, but uses custom tags to define objects and the data within each
object; can be thought of as a text-based database.
CMD – Batch file that contains a series of commands executed in order; introduced with Windows NT, but can be run by
DOS or Windows NT systems; similar to a .BAT file, but is run by CMD.EXE instead of COMMAND.COM.
To create policies:
1.Right-click Policies and then click New Policy.
2.Next to Policy Name type Client1 Policy and then Click Next.
3.On the Configure Conditions for the policy page click Add.
4.In the Add/Edit Condition dialog box choose MAC Address next to Criteria type the MAC address for Client1 next to
Value (001DB7A63D in this example) and then click OK.
5.Click Next, and then in Configure settings for the policy type 10.0.0.100 next to Start IP address and type 10.0.0.199
next to End IP address.

 

QUESTION 4
Your network contains an Active Directory forest. The forest contains two domains named contoso.com and
fabrikam.com. The functional level of the forest is Windows Server 2003. The contoso.com domain contains domain
controllers that run either Windows Server 2008 or Windows Server 2008 R2. The functional level of the domain is
Windows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows Server 2003 or
Windows Server 2008. The functional level of the domain is Windows Server 2003. The contoso.com domain contains a
member server named Server1 that runs Windows Server 2012 R2. You install the Active Directory Domain Services
server role on Server1.
You need to add Server1 as a new domain controller in the contoso.com domain. What should you do?
A. Run the Active Directory Domain Services Configuration Wizard.
B. Run adprep.exe /domainprep, and then run dcpromo.exe.
C. Raise the functional level of the forest, and then run dcprorno.exe.
D. Modify the Computer Name/Domain Changes properties.
Correct Answer: A
Windows Server2012 R2 requires a Windows Server 2003 forest functional level. That is, before you can add a domain
controller that runs Windows Server 2012 R2 to an existing Active Directory forest, the forest functional level must be
Windows Server 2003 or higher.

References: http://blogs.technet.com/b/askpfeplat/archive/2012/09/03/introducing-the-firstwindowsserver-2012-domaincontroller.aspx https://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

 

QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller
named DC1 and a server named Server1. Both servers run Windows Server 2012 R2. You configure the classification
of a share on Server1 as shown in the Share1 Properties exhibit. (Click the Exhibit button.)

You configure the resource properties in Active Directory as shown in the Resource Properties exhibit. (Click the Exhibit
button.)

You need to ensure that the Impact classification can be assigned to Share1 immediately.
Which cmdlet should you run on each server?
To answer, select the appropriate cmdlet for each server in the answer area.
Hot Area:

* Set-AdResourceProperty
The Set-ADResourceProperty cmdlet can be used to modify a resource property in Active Directory.
* Update-FsrmClassificationPropertyDefinition
The Update-FsrmClassificationPropertyDefinition cmdlet synchronizes the classification property definitions on the
server with the Resource property definitions in Active Directory Domain Service (AD DS).
Reference: Set-AdResourceProperty; Update-FsrmClassificationPropertyDefinition

 

QUESTION 6
Your network contains an Active Directory domain named adatum.com. The domain contains two domain controllers
that run Windows Server 2012 R2. The domain controllers are configured as shown in the following table.

You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you create a new
user account named User1.
You need to prepopulate the password for User1 on DC2.
What should you do first?
A. Connect to DC2 from Active Directory Users and Computers.
B. Add DC2 to the Allowed RODC Password Replication Policy group.
C. Add the User1 account to the Allowed RODC Password Replication Policy group.
D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.
Correct Answer: D
To prepopulate the password cache for an RODC by using Active Directory Users and Computers (see step 1 below).
Administrative credentials: To prepopulate the password cache for an RODC, you must be a member of the Domain
Admins group.
Click Start, click Administrative Tools, and then click Active Directory Users and Computers.
Ensure that Active Directory Users and Computers points to the writable domain controller that is running Windows
Server 2008, and then click Domain Controllers.
In the details pane, right-click the RODC computer account, and then click Properties.
Click the Password Replication Policy tab.
Click Advanced.
Click Prepopulate Passwords.
Type the name of the accounts whose passwords you want to prepopulate in the cache for the RODC, and then click
OK.
When you are asked if you want to send the passwords for the accounts to the RODC, click Yes.
Note: You can prepopulate the password cache for an RODC with the passwords of user and computer accounts that
you plan to authenticate to it. When you prepopulate the RODC password cache, you trigger the RODC to replicate and
cache the passwords for users and computers before the accounts try to log on in the branch office.
Incorrect Answers:C. You don\’t need to add User1 to the Allowed RODC Password Replication Policy group. As a first step you should
run Active Directory Users and Computers as a member of the Domain/Enterprise Admins group.
References: Password Replication Policy Administration https://technet.microsoft.com/enus/library/cc753470(v=ws.10).aspx#BKMK_pre

 

QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller
named DC1 that runs Windows Server 2012 R2. DC1 has the DNS Server server role installed.
The network contains client computers that run either Linux, Windows 7, or Windows 8.1.
You have a standard primary zone named adatum.com as shown in the exhibit. (Click the Exhibit button.)

You plan to configure Name Protection on all of the DHCP servers.
You need to configure the adatum.com zone to support Name Protection.
Which two configurations should you perform from DNS Manager? (Each correct answer presents part of the solution.
Choose two.)
A. Sign the zone.
B. Store the zone in Active Directory.
C. Modify the Security settings of the zone.
D. Configure Dynamic updates.
E. Add a DNS key record
Correct Answer: BD
Name protection requires secure update to work. Without name protection DNS names may be hijacked.
You can use the following procedures to allow only secure dynamic updates for a zone. Secure dynamic update is
supported only for Active Directoryintegrated zones. If the zone type is configured differently, you must change the zone
type and directory-integrate the zone before securing it for Domain Name System (DNS) dynamic updates.
1.(B) Convert primary DNS server to Active Directory integrated primary
2.(D) Enable secure dynamic updates

Reference: DHCP: Secure DNS updates should be configured if Name Protection is enabled on any IPv4 scope http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx

 

QUESTION 8
Your network contains an Active Directory forest named contoso.com.
The forest contains a single domain.
The domain contains the domain controllers which are configured as shown in the following table.

Pass4itsure Customers Are Saying:

Pass4itsure provide you latest and relevant Microsoft 70-412 questions & answers that help you to get prepared and pass 70-412 exam in the first attempt
You’ll be able to get Microsoft 70-412 dumps here: https://www.pass4itsure.com/70-412 .html.